|
|
Garage with Fuel Station
Borkesz, Michael ; Pilgr, Milan (referee) ; Barnat, Jan (advisor)
Bachelor thesis presents the structural design of a load bearing steel structure of garage with roof construction of adjoining fuel station. The object is located in periphery area of Uherske Hradiste city, near Jarosov district. The ground plan dimensions are: 36 x 32 meters garage hall; 20 x 20 meters fuel station roofing. Heights of both construction tops are same – 10 meters above the surface. As the main material supporting elements was designed steel S355. The main supporting structure compose of trusses, which are hinged supported by columns. The roof deck is heat insulated, supported by purlins. The wall deck is simillar to roof deck, except of the front wall, which is partly composed of glass casing. At the both sides of garage hall are designed gates for vehicles. The roof deck of fuel station roof construction composes from one single trapezoidal sheet, also supported by purlins. The work contains structural design of individual elements, including mutual joints and anchoring. Calculations are performed according to standards of EN.
|
|
|
Car Showroom
Smrčka, Václav ; Buchta, Stanislav (referee) ; Bajer, Miroslav (advisor)
The aim of the thesis is to design and appreciation steel load-bearing structure of motor show. The object is situated in Brno. The Structure consist of tubes and rolling sections. The breadth of construction is 36,5m, lenght 42m and height in the heihest point is 13,2m. The structrure is consists of three parts. Show room, offices and workshop. The height of show room is 20m, offices 8,5m and workshop 8m. The show room consist of arched truss girder. The distance of each cross links is 6 m. Structural design were perfomered by Scia Engineer 2017 and hand computation.
|
|
|
Continuous box girder bridge over the valley
Haluška, Ľuboš ; Svadbík,, Petr (referee) ; Koláček, Jan (advisor)
The aim of this Diploma thesis is focused on a design of the road bridge between Brodzany and Partizanske municipality, spaned the Valley. The design is processed in three preliminary designs. Selected variant is a continuos girder box with inclined walls, post-tensioned by bonded cables. Structural analysis includes the influences of construction by TDA method. The sctructure is assessed for temporary and permanent states. Design and check were carried out according to EC.
|
|
|
The Multipurpose Centre in Olomouc
Toman, Tomáš ; Pilgr, Milan (referee) ; Šmak, Milan (advisor)
This diploma thesis deals with design of timber load-bearing structure of a Multi-functional object in Olomouc. This object has an eliptical ground plan with dimensions 50x30 metres and height of 11 metres. The idea of the shape is an eliptical dome. This dome was designed in two options, those are a Rib dome and a Föppel dome.
|
|
|
Box girder bridge
Vostal, Lukáš ; Pecha, Jakub (referee) ; Nečas, Radim (advisor)
The subject of this thesis is the design of a prestressed box girder construction with several spans. Two variants are designed and for detailed solving was chosen the variant of the box girder. The length of loadbearing structure is 212 m, the longest span has 60 m. The calculation of load effects is done by software Scia Engineer 19.1. Drawing part is done by software Allplan Engineering 2021. The thesis includes drawings, representation of the construction proces, visualization and a structural design. Designing and assessments were made according to currently valid European standarts.
|
|
|
Design of conveyor of couplers
Klár, Pavel ; Ripel, Tomáš (referee) ; Krejsa, Jiří (advisor)
This thesis is focused on the design of conveyor of couplers with regard to the requirements for the resolution, and consisting of several parts. The first part outlines the given issue, short research study and an idea of solution. The next part concentrates on the structural design of the whole conveyor. Then the description of the first part of the conveyor including the structural design and the required calculations follow. Finally, other conveyor parts, the budget and the instruction manual are explained. The thesis includes the related drawings and all necessary calculations for other conveyors parts as well.
|
|
|
The Steel Structure of Car Showroom
Buchta, Vojtěch ; Buchta, Stanislav (referee) ; Hron, Lukáš (advisor)
The task of the thesis was to design a draft and a review of car’s showroom supporting structure. The object is located in the city of Hradec Králové. Floor plan has a size of 30 x 15 m, the height of the object is 7 m at the highest point. The mono-pitched roof is formed by two parts on the same slope 3.81 °. Material of all components is steel S235. All calculations were performed in accordance with valid standards. The structure consists of a load-bearing columns fixed to the ground, the truss girders are designed of hollow cross-sections, pin-suported by the columns. The purlins are pin supported by upper chords of a truss girder, with the lower and upper edges flushing. Purlins support the roof made of roof-panels by Kingspan, thickness 160 mm. Wall casing the technical parts of the object is formed also by system panels by Kingspan. The cladding of the sales area is made of glass panels by Reynaers.
|
|
|
Design of the test facility
Pavluš, Martin ; Pavlík, Jan (referee) ; Tůma, Zdeněk (advisor)
The thesis deals with the design of automated testing equipment of selected types of pneumatic valves. The problem of manual control process is its inefficiency, both in terms of human error rate and time loss caused by further assembly. The automated manual inspection process eliminates the problem. In the theoretical part, the types of switchgear are described, selected measuring procedures and methods of measurement are described. In the practical part, the measuring procedure was set out and on the basis of it there were designed variants of the testing machine and test circuit. The conclusion of the thesis contains evaluation of the whole project.
|
|
|
Mechanical barrier project
Kubeš, Ondřej ; Škopán, Miroslav (referee) ; Malášek, Jiří (advisor)
The first part of the thesis analysis is about the most common concepts of barriers which restrict the passage of vehicles. These provide security for parking cars. On the basis of this analysis is made design of road barrier. This proposal is accompanied by the plan.
|
|
|
Magnetic separator
Šnédar, Jan ; Malášek, Jiří (referee) ; Jonák, Martin (advisor)
The aim of this bachelor thesis is to design the structural conception of belt magnetic separator with permanent magnet designated to separate unwanted ferromagnetic material waste from the machining of aluminium. This report contains an overview of equipment for the separation and design of concrete solutions to the magnetic separator. According to the input parameters are calculated all the parameters necessary for correct machine design. Attachments to this technical report are documentation drawings of selected parts and assemblies.
|
guest ::
